N1504 NKP175

Outer diameter:: 1.750 inch

Width:: 0.125 inch

Mass:: 0.0586 lbs

We will provide you with the most suitable solution.

Image may differ from product. See technical specification for details.

Brand : QIBR

Measurement system : Imperial

Shaft diameter : 1.750 inch

Thickness (T) : 0.125 inch

Thickness tolerance : +0.004 to -0.004 inch

Inside diameter of rings for shafts in the free state (d3) : 1.406 inch

Shaft washer inner diameter tolerance : +0.01 to -0.01 inch

Outside diameter (d1) : 2.300 inch

Clearance of circlip in groove (C2) : 2.45 inch

MAX radial width of the ring (b) : 0.235 inch

Weight : 0.0586 lbs

Groove diameter (d2) : 1.480 inch

Groove diameter tolerance : +0.015 to -0.015 inch

Groove width (m) : 0.139 inch

Groove width tolerance : +0.010 to 0 inch

Shoulder width (n) : 0.270 inch

Clip thrust load : 17180 lb.f

Groove thrust load : 6680 lb/ft

Material : Carbon spring steel

Applications : For retaining inner pin bushes in articulated joints；In sprocket chains

Download N1504 NKP175 Drawing

N1504 NKP175 Ring Product Features and Advantages

Easy Installation: Provides greater load-bearing capacity in both radial and axial directions, effectively extending the service life of the bearing.

Reliable Fixing Performance: Effectively secures and connects different components, preventing loosening or detachment under vibration or impact conditions.

Strong Adaptability: Suitable for components of various shapes and sizes, allowing for adjustments and selections based on different application needs.

Cost-Effectiveness: Relatively low production costs, strong durability, reduced replacement frequency, and lower overall maintenance and operating costs.

High Strength: Capable of withstanding significant loads, with good tensile strength and compressive capacity.

Application: Widely used in the automotive, aerospace, machinery, construction, and other industries.

QIBR - N1504 NKP175 Ring Product Optimization

High-Performance Materials: Materials for snap rings can be replaced based on different working conditions, such as stainless steel, carbon steel, and plastic.

Surface Heat Treatment: Heat treatments such as coating, oxidation, and polishing are used to enhance wear resistance, corrosion resistance, and aesthetics.

More customization: QIBR can customize snap ring sizes and materials according to customer drawings and operational requirements.

QIBR - N1504 NKP175 Ring Product quality control

Dimension measurement: Various high-precision instruments are used to measure multiple dimensions of the bearings, with maximum precision reaching 0.001mm.

Hardness measurement: The hardness of the bearing surface is measured using a hardness tester, with a precision of ±0.5HRC.

Metallographic analysis: Professional metallographic microscopes are used to analyze the internal metallographic structure of metals.

Raw material control: Steel and parts are purchased from suppliers certified by ISO 14001 to ensure product stability and promote sustainable development.