contact us

Try to get a Free Sample

No. 61, BinHe Road, LuoLong Zone, LuoYang City, P.R. of China

+86 (0379) 639 68877

operating hours

8:00 — 18:00

Consulting method

info@qibr.com

news

Allowable Operating Temperatures for Various Types of Bearings

Common bearings are divided into many types, according to various materials. It is recommended to list the model you need so that it is easy to give accurate quotation. For example,The allowable working temperature of Y-bearing mainly depends on the materials of the bearings, cages, seals, and types of lubricating grease. The allowable operating temperature range is as follows:Standard bearing: -20 to +110 degrees CelsiusStandard bearings containing food grade grease (NTH and NTR grease): -45 to …

2021-02-26

Fill Proper Amount of Grease

First of all, determine the reasonable amount of grease.The grease amount of the bearing can refer to this formula: G = 0.005 DB where: G = grease weight, grams D = bearing outer diameter, mm B = bearing width, mmOr G = 0.114 DBHere, D and B use inch (inch) units.In addition to knowing the amount of grease added, certain methods can also help prevent excessive grease.When adding grease, if you feel the addition is difficult, the addition is blocked, or you start to feel a large reaction force, yo…

2021-01-28

Principle of Bearing Replacement and Grease Filling

1. Commonly, bearing inner space should not be fulfilled with grease. Usually, it would be better to install 1/2 or 3/4 in the whole space bearing cavity.2. Filling with 2/3 to 3/4 of the inner cavity space for axial bearing ;3. Filling with 1/2 (upper) and 3/4 (lower)space for radial installed bearing;4. In easily-polluted environment, fulfill with grease in the entire space for low speed or medium speed bearings.For high-speed bearings, put the bearings in high-quality lubricating oil before l…

2020-12-18

Causes of Needle Roller Bearing Failure

Generally speaking, 33.3% of needle roller bearings are damaged due to fatigue damage, 33.3% of needle roller bearings are due to poor lubrication, and 33.3% are due to pollutants entering the bearing or improper equipment disposal. Dust cleans the bearing and the surrounding environment. The fine dust invisible to the naked eye is a powerful killer of the bearing, which can increase the wear, vibration and noise of the bearing. Stamping forms strong stamping when using equipment, which is very…

2020-11-26

Recent bearing steel market price tendency

From Jan. to Sep., the output of domestic crude steel bearing increased by 3.68% year-on-year, and the output of bearing steel fell 0.85% year-on-year. Looking back at the bearing steel market in October, the overall transaction performance was acceptable, and the market price is still rising slightly. So far, the average price of domestic bearing round steel 50mm (continuous casting) is 4963 RMB/Ton, an increase of 10 RMB/Ton from the end of September, A month-on-month increase of 0.2%. In the r…

2020-11-17

For more information, please contact us.

contact us