contact us

Try to get a Free Sample

No. 61, BinHe Road, LuoLong Zone, LuoYang City, P.R. of China

+86 (0379) 639 68877

operating hours

8:00 — 18:00

Consulting method


Bearing selection methods

The market requirements for various mechanical devices and instruments using rolling bearings are becoming increasingly stringent, and the conditions and performance required for bearings are becoming increasingly diverse. In order to select the most suitable bearing from a large number of structures and sizes, it is necessary to study them from various angles. When choosing a bearing, generally, consider the arrangement of the bearing as a shaft system, the ease of installation and dismantling, …


Bearing maintenance methods

In order to maintain the original performance of the bearings in good condition for as long as possible, maintenance and overhaul are required to prevent accidents before they occur, to ensure reliability of operation and to improve productivity and economy. It is best to carry out maintenance on a regular basis, in accordance with the operating standards of the machinerys operating conditions. This includes monitoring the operating conditions, replenishing or replacing lubricants, and periodic d…


How to overhaul bearings

Cleaning of bearings: When dismantling the bearings for overhaul, first record the appearance of the bearings, confirm the residual amount of lubricant, and wash the bearings after taking samples of the lubricant used for inspection. As a cleaning agent, the common use of cleaning agent, paraffin. Remove the bearing cleaning, divided into coarse cleaning and fine cleaning, respectively, placed in the container, first put on the metal of the net pad bottom, so that the bearing does not directly co…


Precautions for the use of bearings

Rolling bearings are precision components and their use must be carried out with corresponding care. No matter how high performance a bearing is used, if it is not used properly, the expected high performance will not be achieved.Precautions concerning the use of bearings are as follows.(1) Keep the bearings and their surroundings clean.Even small dust that is invisible to the eye can have a bad effect on bearings. Therefore, it is important to keep the surrounding area clean so that dust does no…


How to prevent bearing from rust?

How to prevent bearing from rust?Surface cleaning methodCleaning must be based on the nature of the bearing and the conditions. Generally,there are solvent cleaning method, chemical treatment cleaning method and mechanical cleaning method. Anti-rust Oil methodSoaking method.For some small bearings,we can immerse them in anti-rust grease to adhere a layer of anti-rust grease.Brushing method: For large bearings which are not suitable for soaking or spraying, it is necessary to avoid stock the bear…


For more information, please contact us.

contact us